Dryer repair in Batumi

Dryer repair in Batumi: heating, drive, sensors, condensation drain and full cleaning.

Common issues

• No drying or long drying cycles.
• Noise and vibration.
• Condensate does not drain.
• Temperature or humidity sensor errors.
• On-site visits are available in Batumi city center, Khimshiashvili, New Boulevard, Boni, Airport area and Gonio; exact timing depends on address and technician load.

What we do

• Belt, roller, bearing and fan replacement.
• Heating and control module repair.
• Air duct, filter and condenser cleaning.
• Drainage blockage removal.

Timing and warranty

• On-site diagnostics in Batumi.
• The job is approved before repair.
• Warranty for completed work.

Example jobs

• Full dryer cleaning.
• Heating element replacement.
• Noise and vibration repair.

Why the dryer does not dry well

• Clogging, wear or dirt in working parts.
• Sensor, pump, heating, cooling or control-board failure.
• Installation issues, overload, humidity or limited access to the appliance.
• The exact cause is confirmed by on-site diagnostics.

Why the dryer fails

• The fault is narrowed down by symptom instead of replacing parts blindly.
• Lint filters, condenser, ducts, humidity sensor, heater/heat pump, rollers, belt and condensate pump are checked separately.
• Humidity, heavy use and access conditions in Batumi can make the symptom appear faster.
• The exact cause is confirmed during on-site diagnostics.

Local Batumi conditions

• We confirm model, access and symptom before the visit.
• Service covers central Batumi, Khimshiashvili, New Boulevard, Boni, Airport area and Angisa.
• A heat and airflow test confirms the result.

1

Confirm the symptom, model and visible error code.

2

Lint filters, condenser, ducts, humidity sensor, heater/heat pump, rollers, belt and condensate pump are checked separately.

3

Agree the repair scope and parts before work starts.

4

A heat and airflow test confirms the result.

Brands and models

We work with common appliance brands. Exact repair options depend on the model and parts availability.

Bosch Siemens LG Samsung Beko Electrolux Whirlpool

Verifiable service terms

Only details the customer can see before or during the repair.

• Lint and airflow are checked before replacing heating parts.
• Overheating risk is explained when filters or ducts are blocked.
• Drying result is checked with heat and airflow, not only by powering on.

Scenario 1

Appliance: dryer

Symptom: Repeated dryer fault that needs targeted diagnostics.

Diagnostics: Lint filters, condenser, ducts, humidity sensor, heater/heat pump, rollers, belt and condensate pump are checked separately.

What we do: Clean, adjust or replace the confirmed failed part after approval.

Check result: A heat and airflow test confirms the result.

Time: 1-2 hours

Price guide: After diagnostics, usually from 70 GEL for labor

Area: New Boulevard / Angisa

Scenario 2

Appliance: dryer

Symptom: Unstable dryer operation after active use.

Diagnostics: Lint filters, condenser, ducts, humidity sensor, heater/heat pump, rollers, belt and condensate pump are checked separately.

What we do: Remove blockage/wear cause or agree part replacement after testing.

Check result: A heat and airflow test confirms the result.

Time: 1.5-2 hours

Price guide: After diagnostics, usually from 70 GEL for labor

Area: Center / Boni

Scenario 3

Appliance: Bosch dryer

Symptom: Laundry stays damp after the program

Diagnostics: We check filters, condenser, humidity sensors and airflow.

What we do: Clean lint areas and test heating.

Check result: Drying becomes more stable on the test run.

Time: 1.5-2 hours

Price guide: from 80 GEL

Area: Boni

Scenario 4

Appliance: Samsung dryer

Symptom: Condensate does not go to the tank

Diagnostics: We check condensate pump, hose and float sensor.

What we do: Clean the channel or approve pump replacement.

Check result: The tank fills without a drain error.

Time: 1-2 hours

Price guide: after diagnostics

Area: New Boulevard

Scenario 5

Appliance: LG dryer

Symptom: Noise when the drum rotates

Diagnostics: We check rollers, belt and foreign objects.

What we do: Remove objects and inspect roller and belt wear.

Check result: The drum runs smoother and quieter.

Time: 1.5 hours

Price guide: from 70 GEL

Area: Batumi city center

Dryer filter and condenser cleaning in Batumi

Lint filter diagnostics for a dryer in Batumi

Mechanical and drive

Drive belt replacement from 80–120 ₾
Drum support roller or bearing replacement from 100–180 ₾
Blower fan replacement from 100–150 ₾
Door lock or hinge replacement from 60–90 ₾

Heating and electronics

Heating element replacement from 130–200 ₾
Control module repair or replacement from 150–250 ₾
Sensor replacement (temperature, humidity) from 60–90 ₾

Cleaning and drain

Drain pump replacement from 90–130 ₾
Full cleaning (air ducts, lint filters, condenser) from 80–120 ₾
Drainage blockage removal from 50–70 ₾

Other

Noise and vibration repair from 60–100 ₾

The final cost depends on the model, access to parts and spare part pricing.

Why does drying take much longer?

Blocked filters/condenser, weak heating or humidity sensor faults are common causes. Common service areas include the city center, Khimshiashvili, New Boulevard, Boni, Airport area and Gonio.

Is cleaning enough?

It can be if airflow is blocked; internal ducts, fan and sensors still need checking when errors persist.

Is lint inside a dryer risky?

Yes. Excess lint restricts airflow and can increase overheating risk.

Dryer not drying in Batumi

Why a dryer takes too long or leaves laundry damp: filters, condenser, heating, humidity sensors and condensate drainage.

Open

Prices

Price list and diagnostic terms.

Open

Contacts

Phone, messengers and call-out area.

Open

dryer repair in Batumi tumble dryer repair dryer technician fix a dryer dryer not drying dryer not heating dryer making noise dryer not draining condensation