Gas boiler repair and maintenance in Batumi

Gas boiler repair and maintenance in Batumi: ignition, sensors, burner, heat exchanger, pump and diagnostics.

Common issues

  • Boiler does not start or shuts off.
  • Sensor and board errors.
  • Weak hot water or heating.
  • Leaks and pressure drops.
  • On-site visits are available in Batumi city center, Khimshiashvili, New Boulevard, Boni, Airport area and Gonio; exact timing depends on address and technician load.

What we do

  • Sensor, board, electrode and burner replacement.
  • Heat exchanger flushing and maintenance.
  • Circulation pump and gasket replacement.
  • Boiler safety diagnostics.

Timing and warranty

  • On-site diagnostics in Batumi.
  • The price is agreed before repair.
  • Careful work with gas equipment.

Example jobs

  • Full technical maintenance.
  • Temperature sensor replacement.
  • Heat exchanger descaling flush.

Gas boiler failure causes

  • Clogging, wear or dirt in working parts.
  • Sensor, pump, heating, cooling or control-board failure.
  • Installation issues, overload, humidity or limited access to the appliance.
  • The exact cause is confirmed by on-site diagnostics.

Why the gas boiler fails

  • The fault is narrowed down by symptom instead of replacing parts blindly.
  • Error code, pressure, ignition electrode, burner, draft sensor, pump and heat exchanger are checked with safety first.
  • Humidity, heavy use and access conditions in Batumi can make the symptom appear faster.
  • The exact cause is confirmed during on-site diagnostics.

Local Batumi conditions

  • We confirm model, access and symptom before the visit.
  • Service covers central Batumi, Khimshiashvili, New Boulevard, Boni, Airport area and Angisa.
  • Start-up, hot water and pressure stability are tested after service.

How diagnostics works

A service-specific check sequence for this appliance.

1

Confirm the symptom, model and visible error code.

2

Error code, pressure, ignition electrode, burner, draft sensor, pump and heat exchanger are checked with safety first.

3

Agree the repair scope and parts before work starts.

4

Start-up, hot water and pressure stability are tested after service.

Brands and models

We work with common appliance brands. Exact repair options depend on the model and parts availability.

Ariston Baxi Bosch Vaillant Immergas Beretta Ferroli

Verifiable service terms

Only details the customer can see before or during the repair.

  • Gas odor is treated as an emergency safety issue, not as a normal repair lead.
  • If a licensed gas utility is required, the customer is told directly.
  • Startup, hot water and pressure stability are checked after service.

Diagnostic scenarios in Batumi

These are service-specific repair scenarios, not invented statistics or dated jobs.

Scenario 1

Appliance: gas boiler

Symptom: Repeated gas boiler fault that needs targeted diagnostics.

Diagnostics: Error code, pressure, ignition electrode, burner, draft sensor, pump and heat exchanger are checked with safety first.

What we do: Clean, adjust or replace the confirmed failed part after approval.

Check result: Start-up, hot water and pressure stability are tested after service.

Time: 1-2 hours

Price guide: After diagnostics, usually from 70 GEL for labor

Area: Center / Khimshiashvili

Scenario 2

Appliance: gas boiler

Symptom: Unstable gas boiler operation after active use.

Diagnostics: Error code, pressure, ignition electrode, burner, draft sensor, pump and heat exchanger are checked with safety first.

What we do: Remove blockage/wear cause or agree part replacement after testing.

Check result: Start-up, hot water and pressure stability are tested after service.

Time: 1.5-2 hours

Price guide: After diagnostics, usually from 70 GEL for labor

Area: Boni / Airport area

Scenario 3

Appliance: Ariston gas boiler

Symptom: No ignition and no hot water

Diagnostics: We check pressure, ignition electrode, draft and display error.

What we do: Clean the electrode, test sensors and start safely.

Check result: The boiler starts without repeated error.

Time: 1-2 hours

Price guide: after diagnostics

Area: Khimshiashvili

Scenario 4

Appliance: Baxi gas boiler

Symptom: System pressure drops

Diagnostics: We check the circuit, expansion vessel and visible joints.

What we do: Recharge the vessel or identify the leak point for repair approval.

Check result: Pressure holds during the test run.

Time: 1.5-2 hours

Price guide: from 80 GEL

Area: New Boulevard

Scenario 5

Appliance: Immergas boiler

Symptom: Hot water temperature jumps

Diagnostics: We check flow sensor, heat exchanger and flame stability.

What we do: Clean accessible parts or approve heat exchanger service.

Check result: Water temperature becomes steadier.

Time: 1.5 hours

Price guide: after inspection

Area: Boni

Job photos

Typical on-site work scenes: diagnostics, access to components, and careful testing after repair.

Gas boiler repair in Batumi, New Boulevard
Gas boiler sensor check in Batumi, Khimshiashvili
Wall-mounted gas boiler diagnostics in Batumi

Detailed price table

Sensors and electronics

  • Temperature sensor replacement 40–60 ₾
  • Electronic board replacement 50–60 ₾
  • Draft safety sensor replacement 40–60 ₾

Burner and ignition

  • Electrode replacement without burner removal 40–50 ₾
  • Electrode replacement with burner removal 40–100 ₾
  • Burner replacement 50–80 ₾

Heat exchanger and hydraulics

  • Primary heat exchanger replacement 120–150 ₾
  • Secondary heat exchanger replacement from 80–120 ₾
  • Circulation pump replacement from 80–120 ₾
  • Leak repair / gasket replacement from 50–80 ₾

Maintenance

  • Full cleaning and technical maintenance from 80–120 ₾
  • Heat exchanger descaling flush from 100–150 ₾

The final cost depends on the model, access to parts and spare part pricing.

FAQ

What if I smell gas?
Shut off gas, ventilate, and call emergency gas service. Common service areas include the city center, Khimshiashvili, New Boulevard, Boni, Airport area and Gonio.
Why does boiler pressure drop?
Leaks, air in the system, expansion vessel or valve faults can cause it.
Is boiler maintenance needed?
Yes. Burner, heat exchanger, pump and sensors should be checked to reduce seasonal failures.

Related pages

Useful guides, prices and contact options for this service.

Gas boiler not igniting in Batumi

What to check when a gas boiler does not start: pressure, ignition, sensors, draft, burner, board and safety before calling a technician.

Open

Prices

Price list and diagnostic terms.

Open

Contacts

Phone, messengers and call-out area.

Open

Common searches

gas boiler repair in Batumi boiler repair in Batumi boiler repair near me boiler repairs near me gas boiler repairs in Batumi gas boiler repairs gas boiler technician fix a gas boiler gas boiler maintenance boiler not igniting boiler not heating water boiler pressure dropping

Need gas boiler service?

Describe the symptoms and we will suggest the next step and price range.